Omron SYSDRIVE MX2 SERIES, User Manual

Page: 104 / 620

2 Design
2 - 44 Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
Wiring example when EDM is enabled (for compliance with ISO13849-1 PLd)
When connecting to multiple inverters or safety devices, be sure to use the equipment within its guaran-
teed operating range, according to the above figure.
This section provides conditions that must be met for compliance with European EC Directives.
Take measures to meet the conditions shown here for the entire system as well as peripheral equipment.
For the system that incorporates this inverter, perform the final compliance verification separately on
the whole system.
The 3G3MX2-V1 Series complies with the following standards.
z EMC Directive
OMRON products are the electrical devices incorporated and used in various machines or manufac-
turing equipment. For this reason, OMRON makes efforts to manufacture products that meet the
related EMC standards so that the machines or equipment in which they are incorporated can easily
comply with the EMC standards.
The 3G3MX2-V1 Series Inverter complies with the EMC Directive EN61800-3 when installed and
wired to equipment according to the methods described below. However, your machines and equip-
ment vary in type, and in addition, EMC performance depends on the configuration, wiring, and loca-
tion of the device or control panel in which EC Directive compliant products are incorporated. This
does not allow OMRON to verify the compliance under your usage conditions.
Please perform the final verification on the EMC compliance of your machines or the entire system
at your own responsibility.
Wiring Example
2-3-9 Compliance with EC Directives
Applicable Standards
Standard Applicable standard
EMC Directive EN61800-3
Low-voltage Directive EN61800-5-1
Concepts of Compliance
EDM
GS1
GS2
PSC
G2
V2
G1
V1
PC
24 VDC
Safety input
(Extended input)
MX2 Series
G9SP Series
Safety output
Safety output
24 VDC