Omron SYSDRIVE MX2 SERIES, User Manual

Page: 131 / 620

3 - 23
3 Operation and Test Run
Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
3-4 Ope
rat
ion
Item
s fo
r T
est
Run
3
If no problem is found at power-on, the display status will be as follows.
If any problem is found, the display status will be as follows.
Refer to Section 10 Troubleshooting for countermeasures.
You can initialize the changed parameters and also clear the fault monitor data.
As a measure to prevent inadvertent parameter initialization, the inverter is designed to force the user
to set several parameters to execute initialization.
The following figure shows the steps of complete parameter initialization.
To initialize all the parameters, set the Initialization Target Setting (b094) to 00 (All data).
To initialize the fault monitor and DriveProgramming data in addition to the parameter data, set the Ini-
tialization Selection (b084) to 04.
Set the Initialization Execution (b180) to 01 (Execute initialization) to execute parameter initialization.
For details on parameter initialization, refer to 5-1 Parameter Display and Parameter Initialization on
page 5-3.
Display Status Checks
Name Display status
POWER LED Lit
ALARM LED Not lit
RUN LED Not lit (Lit during RUN)
RUN command LED indicator Lit
Data display LED (Hz) Lit
Data display Displays d001 setting.
Name Display status
POWER LED Lit
ALARM LED Lit
RUN LED Not lit
RUN command LED indicator Lit
Data display LED (Hz) Lit
Data display Displays alarm code such as E01 on data display.
(Displayed alarm code differ depending on error condition.)
Parameter Initialization
Step 1: Press the Enter key
to set b084 to “04”.
Step 2: Press the Enter key
to set b180 to “01”.
Step 3: Initialization is com-
pleted when the ini-
tialization display
disappears
Initializing
Initialization
completed