Omron SYSDRIVE MX2 SERIES, User Manual

Page: 119 / 620

3 - 11
3 Operation and Test Run
Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)
3-1 Operat
ion
of
Digit
al Operat
or
3
3-
1-2 Key Operation Meth
od
Regardless of the display mode of the Digital Operator, if you press (Mode key) for 3 seconds or
more, the data of Output Frequency Monitor (d001) is displayed. However, the Digital Operator contin-
ues to display the function mode and extended function mode in sequence as the normal operation if
you press the Mode key for less than 3 seconds.
For the 3G3MX2 Series, the operation method was changed from the previous models (3G3JX Series
etc.).
The 3G3MX2-V1 Series uses the same operation method as that of the previous 3G3MX2 Series.
Below are the differences of this inverter in the operation method from the previous models (3G3JX
Series etc).
The optional Digital Operator (Model: 3G3AX-OP01) also uses the same operation method as the Digi-
tal Operator built into this inverter.
z Elimination of the top display layer (Overall display of each parameter group)
The top display layer in the operation was eliminated, although the concept of the parame-
ter groups remains as before.
z Change of scroll behavior in each parameter group
The parameter numbers loop in each parameter group when scrolled.
In the previous model, when the highest parameter number in a group appears, the display switches
to display the first parameter number in the next group.
z
Functions of Mode key and Enter key
The functions of the Mode key and Enter key were changed as follows for consistency and simplicity
in operation.
Returning Display to d001
Changes in Operation Method from Previous Models (3G3JX Series etc.)
Name Previous model: 3G3JX Series etc.
This model: 3G3MX2 Series
(both the previous 3G3MX2 and Type V1)
Enter key • Moves to the upper layer.
• Enters or stores the value and returns to
the parameter display.
• Moves to the data display.
• Enters and stores the setting and returns
to the parameter display.
Mode key • Moves to the upper layer.
• Moves to the parameter display.
• Moves to the data display.
• Cancels the setting and returns to the
parameter display.
• Displays the data of Output Frequency
Monitor (d001) if you press the Mode key
for 3 seconds or more.
• Moves to the beginning of the next param-
eter group.
• Cancels the setting and returns to the
parameter display.
• Displays the data of Output Frequency
Monitor (d001) if you press the Mode key
for 3 seconds or more.