manualshive.com logo in svg

Omron SYSDRIVE MX2 SERIES, User Manual

Share
Download
Omron SYSDRIVE MX2 SERIES User Manual Download Page 4

   Manual Configuration

2

Multi-function Compact Inverter 3G3MX2-V1 User’s Manual (I585-E1)

Manual Configuration

This manual is compiled section by section for user’s convenience as follows.

Section

Overview

Section 1

Overview

This section provides an overview of the 3G3MX2-V1 
Series features, standard specifications, and external 
dimensions by inverter capacity. It also shows the differ-
ences of this inverter from the conventional inverter for 
those who use the previous model.

Section 2

Design

This section describes the installation environment and wir-
ing methods.

Section 3

Operation and Test Run

This section describes the part names and key operation of 
the Digital Operator, and the operation method of this prod-
uct as well as the test run procedure.

Section 4

Parameter List

This section provides the parameter lists that show monitor 
functions and available parameters for this inverter.

Section 5

Basic Settings

This section describes the basic functions such as the Run 
command.

Section 6

Vector Control and Applied Functions

This section describes the vector control and applied func-
tions characteristic of this inverter.

Section 7

Other Functions

This section describes the details of functions not described 
in 

Section 5

 or 

Section 6

.

Section 8

Communications Functions

This section describes the general-purpose serial commu-
nications functions (Modbus communication).

Section 9

Overview of DriveProgramming

This section provides the features of the DriveProgram-
ming.

Section 10 Troubleshooting

This section describes how to analyze the cause and take 
countermeasures if the inverter fails, and provides trouble-
shooting for possible troubles.

Section 11 Maintenance and Inspection

This section describes the maintenance and periodical 
inspection items.

Section 12 Options

This section describes the specifications and external 
dimension of optional equipment.

Appendices

This section provides information on derating, capacitor life 
curve, compliance with the UL/cUL Standards, and inverter 
selection.

Summary of Contents for SYSDRIVE MX2 SERIES













































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands