NXP Semiconductors MKW01Z128, Reference Manual

Page: 8 / 884

MKW01xxRM Reference Manual, Rev. 3, 04/2016
Freescale Semiconductor, Inc. ix
Contents
About This Book
This manual details the MKW01, which is a highly-integrated, cost-effective, system-in-package (SIP),
sub-1 GHz wireless node solution with an FSK, GFSK, MSK, or OOK modulation-capable transceiver and
low-power Kinetis microcontroller. The highly integrated RF transceiver operates over a wide frequency
range including 315 MHz, 433 MHz, 470 MHz, 868 MHz, 915 MHz, 928 MHz, and 955 MHz in the
license-free Industrial, Scientific and Medical (ISM) frequency bands.
Audience
This manual is intended for system designers.
Revision History
The following table summarizes revisions to this document since the previous release (Rev 2.0).
Revision History
Location Revision
Chapter 1 • Corrected the package name from 56 LGA to 60-pin LGA
• Added the following paragraph in
Section 1.7.1, “Transceiver overview
“The versatile RF Transceiver in the MKW01 can be configured to be compliant with
the relevant sections of numerous world-wide standards, including but not limited to:
ARIB-T108 and T67, FCC 15.231, 15.247 and 15.249, 802.15.4g, EN54-25 and ETSI
300 220.”
Chapter 2 • Updated Figure 2-1. MKW01Z128 pinout
• Updated Table 2-1. Pin Function Description
• Updated description of pin # 58 in Table 2-2 MKW01Z128 Internal Functional
Interconnects.
Chapter 3 • Updated Table 3-2 Reset State of PORTx_PCRn Register Bit Fields.
• Updated Table 3-3 MKW01 Pin Assignments and Signal Multiplexing.
Chapter 4 • Added a note related to CLKOUT in Idle mode to Section 4.3.3, “External Clock
Connections .
Chapter 5 • Added a note to Section 5.5.5, “Lock Detect Indicator .
• Added a figure to show Pout vs. Programmed Power to Section 5.6.5, “Power
Amplifiers .
• Updated the following sentence in Section 5.7.3, “Continuous-Time DAGC from
“The DAGC is enabled by setting RegTestDagc to 0x10“ to “The DAGC is enabled by
setting RegTestDagc to 0x20“.
• Added Table 5-6. Available DCC Cutoff Frequencies Expressed as Percentage of
RXBW (continued) to Section 5.7.6, “DC Cancellation .
• Added RSSI chart and the notes following the figure to Section 5.7.8, “RSSI .
Chapter 6 • Added a note related to CLKOUT in Idle mode to Section 6.3, “Listen Mode .
Chapter 7 • Updated Reset value of RegVersion (at address 0x10) from 0x22 to 0x 23 in Table 7-4.
Registers Summary. Also added a line for register RegTestTcxo at address 0x59.
• Added a line for register RegTestTcxo at address 0x59 in Table 7-11 Test Registers.
Also updated description of RegTestDagc (0x6F) register.