NXP Semiconductors MKW01Z128, Reference Manual

Page: 581 / 884

24.4.18 ADC Minus-Side General Calibration Value Register
(ADCx_CLMD)
The Minus-Side General Calibration Value (CLMx) registers contain calibration
information that is generated by the calibration function. These registers contain seven
calibration values of varying widths: CLM0[5:0], CLM1[6:0], CLM2[7:0], CLM3[8:0],
CLM4[9:0], CLMS[5:0], and CLMD[5:0]. CLMx are automatically set when the self-
calibration sequence is done, that is, CAL is cleared. If these registers are written by the
user after calibration, the linearity error specifications may not be met.
For more information regarding the calibration procedure, please refer to the Calibration
function section.
Address: 4003_B000h base + 54h offset = 4003_B054h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
CLMD
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0
ADCx_CLMD field descriptions
Field Description
31–6
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
CLMD Calibration Value
Calibration Value
24.4.19 ADC Minus-Side General Calibration Value Register
(ADCx_CLMS)
For more information, see CLMD register description.
Address: 4003_B000h base + 58h offset = 4003_B058h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
CLMS
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0
Memory map and register definitions
MKW01Z128 MCU Reference Manual, Rev. 3, 04/2016
450 Freescale Semiconductor, Inc.