NXP Semiconductors MKW01Z128, Reference Manual

Page: 13 / 884

MKW01Z128 Introduction and Chip Configuration
MKW01xxRM Reference Manual, Rev. 3, 04/2016
1-2 Freescale Semiconductor, Inc.
— Fast, high precision 16-bit ADCs, 12-bit DACs, high speed comparators and an internal voltage
reference. Powerful signal conditioning, conversion and analysis capability with reduced
system cost
• Human Machine Interface (HMI):
— Capacitive Touch Sensing Interface with full low-power support and minimal current adder
when enabled
• Connectivity and Communications:
— UARTs with ISO7816, CEA709.1-B (LON), and IrDA support, I2C, and DSPI
• Reliability, Safety and Security:
— Hardware cyclic redundancy check engine for validating memory contents/ communication
data and increased system reliability
— Independent-clocked computer operating properly (COP) for protection against code runaway
in fail-safe applications
— External watchdog monitor
• Timing and Control:
— Programmable Interrupt Timer for RTOS task scheduler time base or trigger source for ADC
conversion and programmable delay block
• System:
— Wide operating voltage range from 1.8 V to 3.6 V with flash programmable down to 1.8 V with
fully functional flash and analog peripherals
— Ambient operating temperature ranges from –40°C to 85°C
1.1 KW01 family introduction
The KW01 family is the entry point into the Kinetis W-Series portfolio. The K01W is a single-chip
solution combining an ARM Cortex-M0+ microcontroller and a sub-GHz ISM band radio front-end
device.
Devices contain 128 KB of flash and 16 KB of SRAM in an 8 x 8 mm 60-pin LGA package. Standard
features include a rich suite of analog, communication, timing and control peripherals. Additionally,
flexible low-power capabilities and innovative FlexMemory help to solve many of the major pain points
for system implementation.
1.2 Ordering information
Table 1-2 lists the available devices in the MKW01 family.