NXP Semiconductors MKW01Z128, Reference Manual, Page: 87 / 884

Transceiver Operating Modes
MKW01xxRM Reference Manual, Rev. 3, 04/2016
6-8 Freescale Semiconductor, Inc.
The initial and the final state is the one configured in Mode in RegOpMode . The initial & final states can
be different by configuring the modes register while the chip is in intermediate mode. The pictorial
description of the auto modes is shown below.
Figure 6-7. Auto Modes of Packet Handler
Some typical examples of AutoModes usage are described below:
• Automatic transmission (AutoTx) : Mode = Sleep, IntermediateMode = TX, EnterCondition =
FifoLevel , ExitCondition = PacketSent
• Automatic reception (AutoRx) : Mode = RX, IntermediateMode = Sleep, EnterCondition = CrcOk ,
ExitCondition = falling edge of FifoNotEmpty
• Automatic reception of acknowledge (AutoRxAck): Mode = TX, IntermediateMode = RX,
EnterCondition = PacketSent , ExitCondition = CrcOk
Initial state defined
By M
ode
in RegOpMode
Intermediate State
defined by IntermediateMode
ExitCondition
EnterCondition
Final state defined
By M
ode
in RegOpMode