Dell Networking S4810, Reference Manual

Page: 1371 / 1761

Version
8.3.12.0 Introduced on the S4810.
Related
Commands service-class dot1p-mapping — Identifies the class map.
show qos policy-map
View the QoS policy map information.
S4810
Syntax
show qos policy-map {summary [ interface ] | detail}
Parameters
summary
interface
To view a policy map interface summary, enter the keyword
summary
and optionally one of the following keywords and
slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
detail interface To view a policy map interface in detail, enter the keyword
detail
and optionally one of the following keywords and
slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Quality of Service (QoS)
1371