Dell Networking S4810, Reference Manual

Page: 1609 / 1761

show redundancy
Display the current redundancy configuration (status of automatic reboot configuration on stack
management unit).
S4810
Syntax
show redundancy
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 7.7.1.0 Introduced on the S-Series.
Usage
Information To modify your results, use the
show redundancy [pipe]
command, as follows:
•
except
— show only text that doesn not match a pattern.
•
find
— search for the first occurrence of a pattern.
•
grep
— show only text that matches a pattern.
•
no-more
— do not paginate the output.
•
save
— save the output to a file.
Example
Dell#show redundancy
Dell#show redundancy
-- SSeries Redundancy Configuration --
------------------------------------------------
Auto reboot : Enabled
-- Stack-unit Status --
------------------------------------------------
Mgmt ID: 0
Stack-unit ID: 0
Stack-unit Redundancy Role: Primary
Stack-unit State: Active
Stack-unit SW Version: 7.7.1.0
Link to Peer: Up
-- PEER Stack-unit Status --
------------------------------------------------
Stack-unit State: Standby
Peer stack-unit ID: 1
Stacking
1609