manualshive.com logo in svg

Dell Networking S4810, Reference Manual

Share
Download
Dell Networking S4810 Reference Manual Download Page 110

ip ftp username

 — sets the user name for the FTP sessions.

ip ftp source-interface

Specify an interface’s IP address as the source IP address for FTP connections.

S4810 

Syntax

ip ftp source-interface 

interface

To delete an interface, use the 

no ip ftp source-interface 

interface 

command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For Loopback interfaces, enter the keyword 

loopback 

then a number from zero (0) to 16383.

• For a Port Channel interface, enter the keyword 

port-

channel

 then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For a VLAN interface, enter the keyword 

vlan

 then a 

number from 1 to 4094.

• For a tunnel interface, enter the keyword 

tunnel

.

Defaults

The IP address on the system that is closest to the Telnet address is used in the 
outgoing packets.

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.5.1.0

Added support for 4-port 40G line cards on ExaScale.

110

Control and Monitoring

Summary of Contents for Networking S4810


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands