Dell Networking S4810, Reference Manual

Page: 498 / 1761

Related
Commands show ipv6 prefix-list — View the selected IPv6 prefix-list.
neighbor soft-reconfiguration inbound
Enable a BGP soft-reconfiguration and start storing updates for inbound IPv6 unicast routes.
S4810
Syntax
neighbor { ipv4-address | ipv6-address | peer-group-name } soft-
reconfiguration inbound
Parameters
ipv4-address |
ipv6-address
Enter the IP address of the neighbor for which you want to
start storing inbound routing updates.
peer-group-
name Enter the name of the peer group for which you want to start
storing inbound routing updates.
Defaults Disabled.
Command
Modes ROUTER BGPv6 ADDRESS FAMILY (conf-router_bgpv6_af)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 8.4.1.0 Added support for IPv4 multicast and IPv4 unicast address
families.
Version
8.3.19.0 Introduced on the S4820T.
Version 7.8.1.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced
Usage
Information This command enables soft-reconfiguration for the specified BGP neighbor. BGP
stores all updates for inbound IPv6 unicast routes the neighbor receives but does
not reset the peer-session.
CAUTION: Inbound update storage is a memory-intensive operation. The
entire BGP update database from the neighbor is stored in memory
regardless of the inbound policy results applied on the neighbor.
498
Border Gateway Protocol