Dell Networking S4810, Reference Manual

Page: 1742 / 1761

Example
Dell#clear counters vrrp vrf jay
Clear "show vrrp" counters of all vrrp groups on all
interfaces in VRF jay [confirm] yes
debug vrrp
Allows you to enable debugging of VRRP.
S4810
Syntax
debug vrrp interface [ vrrp-id ] {all | bfd | database |
interface | ipv6 | packets | state | timer}
To disable debugging, use the
no debug vrrp interface [ vrrp-id ] {all |
bfd | database | interface | ipv6 | packets | state | timer}
command.
Parameters
interface Enter the following keywords and slot/port or number
information
• For Port Channel interface types, enter the keywords
port-channel
then the number. The range is from 1 to
128.
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet
followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet
then the slot/port information.
• For a VLAN interface, enter the keyword
vlan
then the
VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP
group ID.
all Enter the keyword
all
to enable debugging of all VRRP
groups.
bfd Enter the keyword
bfd
to enable debugging of VRRP BFD
interactions.
database Enter the keyword
database
to enable debugging of
configuration changes.
interface Enter the keyword
interface
to enable debugging of
interface state changes..
ipv6 Enter the keyword
ipv6
to enable debugging for IPv6.
packets Enter the keyword
packets
to enable debugging of VRRP
control packets.
state Enter the keyword
state
to enable debugging of VRRP state
changes.
1742
Virtual Router Redundancy Protocol (VRRP)