Dell Networking S4810, Reference Manual

Page: 446 / 1761

Parameters
ip-address Enter an IP address in dotted decimal format of the network.
mask
Enter the mask of the IP address in the slash prefix length
format (for example, /24).
The mask appears in command outputs in dotted decimal
format (A.B.C.D).
Defaults Not configured.
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information Although Dell Networking OS does not generate a route due to the backdoor
config, there is an option for injecting/sourcing a local route in the presence of
network backdoor config on a learned route.
redistribute
Redistribute routes into BGP.
S4810
Syntax
redistribute {connected | static} [route-map map-name ]
To disable redistribution, use the
no redistribution {connected | static}
command.
Parameters
connected Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
static
Enter the keyword
static
to redistribute manually
configured routes.
These routes are treated as incomplete routes.
446
Border Gateway Protocol