manualshive.com logo in svg

Dell Networking S4810, Reference Manual

The Dell Networking S4810 is a high-performance switch designed for data centers and enterprise networks. With its advanced features and cutting-edge technology, it delivers exceptional throughput and low latency. To explore its complete specifications, download the free user manual from our website manualshive.com today.

Share
Download
background image

NOTE: 
1. If the MAC ACL is applied on VLAN, none of the VLAN members should have 
an access list applied for that VLAN.

2. If the MAC ACL is applied on a Physical or Port Channel interface, the VLAN 
in which this port is associated should not have an access list applied.

3. If the MAC ACL is applied on a VLAN, then that VLAN should not belong to 
VLAN ACL group.

4. If the MAC ACL is applied on a VLAN ACL group, then none of the VLANs in 
that group should have an access list applied on it.

Defaults

none

Command 
Modes

INTERFACE

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.8.1.0

Increased the name string to accept up to 140 characters. 
Prior to 7.8.1.0, names are up to 16 characters long.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.1.1.0

Introduced on the E-Series.

Usage 
Information

You can assign one ACL (standard or extended) to an interface.

Related 
Commands

mac access-list standard

 — configures a standard MAC ACL.

mac access-list extended

 — configures an extended MAC ACL.

248

Access Control Lists (ACL)

Summary of Contents for Networking S4810


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Networking S4810

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 44
Baracoda All in One Printer Communication Protocol Manual preview
All in One Printer
Brand: Baracoda Pages: 42
Paradyne COMSPHERE 3610 User Manual preview
COMSPHERE 3610
Brand: Paradyne Pages: 112
Cambium Networks PMP 450 Series User Manual preview
PMP 450 Series
Brand: Cambium Networks Pages: 215
NETGEAR RP334 Specifications preview
RP334
Brand: NETGEAR Pages: 2
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Brand: FOR-A Pages: 72
H3C S10500 Series Mpls Configuration Manual preview
S10500 Series
Brand: H3C Pages: 400
Teknim TWM-1886 Installation & User Manual preview
TWM-1886
Brand: Teknim Pages: 10
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Brand: Buffalo Pages: 2
IMC Networks iMcV-FiberLinX Operation Manual preview
iMcV-FiberLinX
Brand: IMC Networks Pages: 36
Vacron VDH-NK300 Hardware Manual preview
VDH-NK300
Brand: Vacron Pages: 16
Broadband Products D-Link DSL-2640U Quick Installation Manual preview
D-Link DSL-2640U
Brand: Broadband Products Pages: 12
ADTRAN ENHANCED PSD 239 H2R Product Manual preview
ENHANCED PSD 239 H2R
Brand: ADTRAN Pages: 2
E-Lins H820Q Series Quick Start Manual preview
H820Q Series
Brand: E-Lins Pages: 10
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Brand: Juniper Pages: 64
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Brand: NETGEAR Pages: 100
Billion BIPAC 7100G Quick Start Manual preview
BIPAC 7100G
Brand: Billion Pages: 14
Eneo PNR-5332/3TB Quick Installation Manual preview
PNR-5332/3TB
Brand: Eneo Pages: 49

Brands by name

Popular brands

Load more brands