Dell Networking S4810, Reference Manual

Page: 448 / 1761

To redistribute the default route (0.0.0.0/0), configure the
neighbor default-
originate
command.
As BGP does not query next-hop information corresponding to locally originated
routes, a local route with an unreachable next-hop is chosen as the best route.
When a combination of locally originated and peer originated routes occurs, both
these routes will exist in the RTM. However, only the best route is kept active in the
RTM and the remaining route is rendered in-active.
It is possible to keep only one locally originated route in the BGP database.
Network command has preference over the re-distributed routes. When the locally
originated route is no longer present in the database the other route is
automatically installed.
Related
Commands neighbor default-originate — injects the default route.
redistribute ospf
Redistribute OSPF routes into BGP.
S4810
Syntax
redistribute ospf process-id [[match external {1 | 2}] [match
internal]] [route-map map-name ]
To stop redistribution of OSPF routes, use the
no redistribute ospf
process-id
command.
Parameters
process-id Enter the number of the OSPF process. The range is from 1
to 65535.
match external
{1 | 2} (OPTIONAL) Enter the keywords
match external
to
redistribute OSPF external routes. You can specify
1
or
2
to
redistribute those routes only.
match internal (OPTIONAL) Enter the keywords
match internal
to
redistribute OSPF internal routes only.
route-map
map-name
(OPTIONAL) Enter the keywords
route-map
then the name
of a configured route map.
Defaults Not configured.
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
448
Border Gateway Protocol