Dell Networking S4810, Reference Manual

Page: 1476 / 1761

Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added support for the
secret
option and the MD5
password encryption. Extended the name from 25 to 63
characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information To view the defined user names, use the
show running-config user
command.
Related
Commands
password — specifies a password for users on terminal lines.
show running-config — views the current configuration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
debug radius
View RADIUS transactions to assist with troubleshooting.
S4810
Syntax
debug radius
To disable debugging of RADIUS, use the
no debug radius
command.
Defaults Disabled.
1476
Security