Dell Networking S4810, Reference Manual

Page: 191 / 1761

Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.1.0 Added the
multi-auth
option on the C-Series and S-Series.
Version 8.3.2.0 Added the
single-host
and
multi-host
options on the
C-Series, E-Series, and S-Series.
Usage
Information
• Single-host mode authenticates only one host per authenticator port and drops
all other traffic on the port.
• Multi-host mode authenticates the first host to respond to an Identity Request
and then permits all other traffic on the port.
• Multi-supplicant mode authenticates every device attempting to connect to the
network on the authenticator port.
Related
Commands show dot1x interface — Display the 802.1X configuration of an interface.
dot1x mac-auth-bypass
Enable MAC authentication bypass. If 802.1X times out because the host did not respond to the Identity
Request frame, Dell Networking OS attempts to authenticate the host based on its MAC address.
S4810
Syntax
dot1x mac-auth-bypass
To disable MAC authentication bypass on a port, use the
no dot1x mac-auth-
bypass
command.
Defaults Disabled
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
802.1X
191