Dell Networking S4810, Reference Manual

Page: 386 / 1761

Version 7.7.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced
Usage
Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During path selection, paths with a lower MED are preferred over paths with a
higher MED.
bgp bestpath router-id ignore
Do not compare router-id information for external paths during best path selection.
S4810
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the
no bgp bestpath router-id
ignore
command.
Defaults Disabled
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced
Usage
Information Configuring this option retains the current best-path. When sessions are then reset,
the oldest received path is chosen as the best-path.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
S4810 S6000
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the
no bgp client-to-client
reflection
command.
386
Border Gateway Protocol