Dell Networking S4810, Reference Manual

Page: 603 / 1761

Parameters
eg-acl | in-acl Enter either the keyword
eg-acl
or the keyword
in-acl
to
select between ingress or egress ACL data.
stack- unit id Enter the keyword
stack-unit
to select a stack ID. The
range is 0 to 11 for the S4810.
port-set 0–0 Enter the keywords
port-set
with a port-pipe number. .
The range is 0 for the S4810.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Usage
Information The unit numbers given are internal port numbers.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
S4810
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0
Parameters
acl | qos Enter either the keyword
acl
or the keyword
qos
to select
between ACL or QoS data.
stack-unit
number
Enter the keywords
stack-unit
then a number to select a
stack ID. The range is 0 to 11 for the S4810.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The
range is 0 to 0 for the S4810.
Defaults none
Command
Modes EXEC Privilege
Debugging and Diagnostics
603