Dell Networking S4810, Reference Manual

Page: 1335 / 1761

Parameters
vlan vlan-range Enter the keyword
vlan
then the VLAN numbers. The range
is from 1 to 4094.
bridge-priority
value
Enter the keywords
bridge-priority
then the bridge
priority value in increments of 4096. The range is from 0 to
61440. The default is
32768 .
Defaults 32768
Command
Modes CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced.
Related
Commands
vlan forward-delay — changes the time interval before Dell Networking OS
transitions to the Forwarding state.
vlan hello-time — change the time interval between BPDUs.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.
vlan forward-delay
Set the amount of time the interface waits in the Listening state and the Learning state before
transitioning to the Forwarding state.
S4810
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, use the
no vlan forward-delay
command.
Per-VLAN Spanning Tree Plus (PVST+)
1335