Dell Networking S4810, Reference Manual

Page: 897 / 1761

Ingress interface:Gi 1/20
Egress interface:Gi 1/14 to 1.7.1.2[CAM hit 103710]
unfragmented packet
Gi 1/10 to 1.2.1.2[CAM hit 103710] fragmented
packet
show ip interface
View IP-related information on all interfaces.
S4810
Syntax
show ip interface [ interface | brief] [configured]
Parameters
interface (OPTIONAL)
Enter the following keywords and slot/port or number
information:
• For a Loopback interface, enter the keyword
Loopback
then a number from 0 to 16383.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For the Management interface, enter the keyword
ManagementEthernet
then zero (0).
• For the Null interface, enter the keyword
null
then zero
(0).
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a stack-unit interface, enter the keyword
stack-
unit
then the stack unit number. The range is from 0 to
7.
• For a tunnel interface, enter the keyword
tunnel
then
the tunnel interface number. The range is from 1 to
16383.
• For a VLAN, enter the keyword
vlan
then a number from
1 to 4094.
brief (OPTIONAL) Enter the keyword
brief
to view a brief
summary of the interfaces and whether an IP address is
assigned.
configured (OPTIONAL) Enter the keyword
configured
to display the
physical interfaces with non-default configurations only.
IPv4 Routing
897