Dell Networking S4810, Reference Manual

Page: 1050 / 1761

117 0 0 00:01:e8:0d:b7:5d SYSTEM_STATIC DROP
Dell#
show mac-address-table
Display the MAC address table.
S4810
Syntax
show mac-address-table [address mac-address | interface
interface | vlan vlan-id ] [aging-time] [dynamic | static]
[count [vlan vlan-id ] [interface interface-type [ slot [ /
port ]]]]
Parameters
address mac-
address
(OPTIONAL) Enter the keyword
address
then a MAC
address in the nn:nn:nn:nn:nn:nn format to display
information on that MAC address.
dynamic (OPTIONAL) Enter the keyword
dynamic
to display only
those MAC addresses the switch dynamically learns.
Optionally, you can also add one of these combinations:
address/ mac-address
,
interface/ interface
, or
vlan
vlan-id
.
static (OPTIONAL) Enter the keyword
static
to display only those
MAC addresses specifically configured on the switch.
Optionally, you can also add one of these combinations:
address/ mac-address
,
interface/ interface
, or
vlan
vlan-id
.
aging-time Enter the keyword
aging-time
to display only aging-time
information.
interface
interface
(OPTIONAL) Enter the keyword
interface
then the
interface type, slot and port information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
interface
interface-type
(OPTIONAL) Instead of entering the keyword
interface
then the interface type, slot and port information, as above,
you can enter the interface type, then just a slot number.
vlan vlan-id (OPTIONAL) Enter the keyword
vlan
then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1
to 4094.
count (OPTIONAL) Enter the keyword
count
, then optionally, by an
interface or VLAN ID, to display total or interface-specific
1050
Layer 2