Dell Networking S4810, Reference Manual

Page: 124 / 1761

Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information If there is a change in the configuration, FTOS prompts you to save the new
configuration. Or you can save your running configuration with the
copy
running-config
command. Use the conditional parameter if any configuration
changes made to the nvram, such as stack-group and fanout configurations, must
be saved.
Related
Commands
• reset stack-unit — resets any designated stack member except the
management unit.
send
Send messages to one or all terminal line users.
S4810
Syntax
send [*] | [line ] | [console] | [vty]
Parameters
* Enter the asterisk character
*
to send a message to all tty
lines.
line Send a message to a specific line. The range is from 0 to 11.
console Enter the keyword
console
to send a message to the
primary terminal line.
vty Enter the keyword
vty
to send a message to the virtual
terminal.
Defaults none
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
124
Control and Monitoring