Dell Networking S4810, Reference Manual

Page: 224 / 1761

Version 6.5.1.0 Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage
Information
The
order
option is relevant in the context of the Policy QoS feature only. For
more information, refer to the Quality of Service chapter of the Dell Networking OS
Configuration Guide .
When you use the
log
option, the CP processor logs detail the packets that match.
Depending on how many packets match the log entry and at what rate, the CP
may become busy as it has to log these packets’ details.
The
monitor
option is relevant in the context of flow-based monitoring only. For
more information, refer to the Port Monitoring chapter.
The C-Series and S-Series cannot count both packets and bytes, when you enter
the count byte options, only bytes are incremented.
NOTE: When ACL logging and byte counters are configured simultaneously,
byte counters may display an incorrect value. Configure packet counters with
logging instead.
Related
Commands
deny tcp — assigns a filter to deny TCP packets.
deny udp — assigns a filter to deny UDP packets.
ip access-list extended — creates an extended ACL.
deny icmp
To drop all or specific internet control message protocol (ICMP) messages, configure a filter.
S4810
Syntax
deny icmp { source mask | any | host ip-address } { destination
mask | any | host ip-address } [dscp] [count [byte] | log]
[order] [monitor] [fragments]
To remove this filter, you have two choices:
• Use the
no seq sequence-number
command if you know the filter’s
sequence number.
• Use the
no deny icmp { source mask | any | host ip-address }
{ destination mask | any | host ip-address }
command.
Parameters
source Enter the IP address of the network or host from which the
packets were sent.
mask Enter a network mask in /prefix format (/x) or A.B.C.D. The
mask, when specified in A.B.C.D format, may be either
contiguous or non-contiguous.
224
Access Control Lists (ACL)