Dell Networking S4810, Reference Manual

Page: 1045 / 1761

mac learning-limit mac-address-sticky
Maintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.
S4810
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the
no mac
learning-limit
command.
Parameters
mac-address-
sticky Configures the dynamic MAC addresses as sticky on an
interface.
Defaults none
Command
Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.12.0 Introduced on the S4810.
Usage
Information If you configure
mac-learn-limit
and the sticky MAC feature is enabled,
dynamically learned MAC addresses are converted to sticky for that port. Any new
MAC address that is learned also becomes sticky for that port.
Related
Commands show mac learning-limit — displays the details of the mac learning-limit.
mac learning-limit station-move-violation
Specify the actions for a station move violation.
S4810
Syntax
mac learning-limit station-move-violation {log | shutdown-both
| shutdown-offending | shutdown-original}
To disable a configuration, use the
no mac learning-limit station-move-
violation
command, then the configured keyword.
Layer 2
1045