Dell Networking S4810, Reference Manual

Page: 1460 / 1761

method-list-
name Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
method Enter one of the following methods:
•
enable
: use the password the
enable password
command defines in CONFIGURATION mode.
•
line
: use the password the
password
command defines
in LINE mode.
•
none
: no authentication.
•
radius
: use the RADIUS servers configured with the
radius-server host
command.
• : use the server(s) configured with the
tacacs-server host
command.
... method2 (OPTIONAL) In the event of a “no response” from the first
method, Dell Networking OS applies the next configured
method.
Defaults Use the
enable
password.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.0 Introduced on the E-Series.
Usage
Information
By default, the
Enable password
is used. If you configure
aaa authentication
enable default
, Dell Networking OS uses the methods defined for
Enable
access
instead.
Methods configured with the
aaa authentication enable
command are
evaluated in the order they are configured. If authentication fails using the primary
method, Dell Networking OS employs the second method (or third method, if
necessary) automatically. For example, if the server is reachable, but the
server key is invalid, Dell Networking OS proceeds to the next authentication
1460
Security