Dell Networking S4810, Reference Manual

Page: 250 / 1761

show mac accounting access-list
Display MAC access list configurations and counters (if configured).
S4810
Syntax
show mac accounting access-list access-list-name interface
interface in | out
Parameters
access-list-
name Enter the name of a configured MAC ACL, up to 140
characters.
interface
interface
Enter the keyword
interface
then the one of the following
keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
port-
channel
and then enter a number. The range is from 1
to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
and then enter the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
and then enter the slot/port information.
• For a VLAN interface, enter the keyword
VLAN
followed
by the vlan id.
in | out Identify whether ACL is applied on ingress or egress side.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
250
Access Control Lists (ACL)