Dell Networking S4810, Reference Manual

Page: 1336 / 1761

Parameters
vlan vlan-range Enter the keyword
vlan
then the VLAN numbers. The range
is from 1 to 4094.
forward-delay
seconds
Enter the keywords
forward-delay
then the time interval,
in seconds, that Dell Networking OS waits before
transitioning PVST+ to the forwarding state. The range is
from 4 to 30 seconds. The default is
15 seconds .
Defaults 15 seconds
Command
Modes CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan hello-time — changes the time interval between BPDUs.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.
vlan hello-time
Set the time interval between generation of PVST+ 7 BPDUs.
S4810
Syntax
vlan vlan-range hello-time seconds
To return to the default value, use the
no vlan hello-time
command.
1336
Per-VLAN Spanning Tree Plus (PVST+)