Dell Networking S4810, Reference Manual

Page: 886 / 1761

Field Description
• ?? — the entry is suspect.
TTL Displays the amount of time until the entry ages out of the
cache. For dynamically learned entries only.
Type Displays IP as the type of entry.
Address Displays the IP addresses assigned to the host.
Example
Dell#show hosts
Default domain is not set
Name/address lookup uses static mappings
Name servers are not set
Host Flags TTL Type Address
-------- ----- ---- ---- -------
ks (perm, OK) - IP 2.2.2.2
4200-1 (perm, OK) - IP 192.68.69.2
1230-3 (perm, OK) - IP 192.68.99.2
ZZr (perm, OK) - IP 192.71.18.2
Z10-3 (perm, OK) - IP 192.71.23.1
Dell#
Related
Commands
traceroute — views the DNS resolution.
ip host — configures a host.
show ip cam linecard
View CAM entries for a port pipe on a line card.
S4810
Syntax
show ip cam linecard number port-set pipe-number [ ip-address
mask [longer-prefixes] | index index-number | summary | vrf vrf
instance ]
Parameters
number Enter the number of the line card.
pipe-number Enter the number of the line card’s port-pipe. The range is
from 0 to 1.
ip-address
mask
[longer-
prefix]
(OPTIONAL) Enter the IP address and mask of a route to
CAM entries for that route only. Enter the keyword
longer-
prefixes
to view routes with a common prefix.
index index-
number
(OPTIONAL) Enter the keyword
index
then the CAM index
number. The range depends on CAM size.
summary (OPTIONAL) Enter the keyword
summary
to view a table
listing route prefixes and the total number of routes that can
be entered into the CAM.
886
IPv4 Routing