Dell Networking S4810, Reference Manual

Page: 1484 / 1761

•
0
is the default and means the key is not encrypted and
stored as clear text.
•
7
means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the
switch and RADIUS servers. It can be up to 42 characters
long.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Authentication key length increased to 42 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0 Introduced on the E-Series.
Usage
Information
The key configured on the switch must match the key configured on the RADIUS
server daemon.
If you configure the
key
parameter in the
radius-server host
command, the
key configured with the
radius-server key
command is the default key for all
RADIUS communications.
Related
Commands radius-server host — configures a RADIUS host.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
S4810
Syntax
radius-server retransmit retries
1484
Security