Dell Networking S4810, Reference Manual

Page: 410 / 1761

Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To remove all configured debug commands for BGP, enter the
no debug ip bgp
command.
debug ip bgp keepalives
Display information about BGP keepalive messages.
S4810
Syntax
debug ip bgp [ ip-address | peer-group peer-group-name ]
keepalives [in | out]
To disable debugging, use the
no debug ip bgp [ip-address | peer-group
peer-group-name ] keepalives [in | out]
command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group
peer-group-
name
(OPTIONAL) Enter the keyword
peer-group
then the name
of the peer group.
in (OPTIONAL) Enter the keyword
in
to view only inbound
keepalive messages.
out (OPTIONAL) Enter the keyword
out
to view only outbound
keepalive messages.
Command
Modes EXEC Privilege
410
Border Gateway Protocol