Dell Networking S4810, Reference Manual

Page: 175 / 1761

Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell#show ethernet cfm maintenance-points local mip
-----------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-----------------------------------------------------
0 service1 4 MIP Gi 0/5 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Gi 0/5 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
show ethernet cfm maintenance-points remote
Display the MEP Database.
S4810
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {
level | name } | expired | waiting]
Parameters
active Enter the keyword
active
to display only the MEPs in active
state.
domain [ name |
level ]
Enter the keyword
domain
then the domain name or domain
level.
expired Enter the keyword
expired
to view MEP entries that have
expired due to connectivity failure.
waiting Enter the keyword
waiting
to display MEP entries waiting
for response.
Defaults none
Command
Modes EXEC Privilege
802.1ag
175