Dell Networking S4810, Reference Manual

Page: 406 / 1761

Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information If you enter the
clear ip bgp flap-statistics
command without any
parameters, all statistics are cleared.
Related
Commands
show debugging — views the enabled debugging operations.
show ip bgp flap-statistics — views the BGP flap statistics.
undebug all — disables all debugging operations.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
S4810
Syntax
clear ip bgp [vrf vrf-name ] peer-group peer-group-name
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to
reset the peer group corresponding to that VRF.
NOTE: You can use this attribute on a specific VRF to
remove history routes corresponding to that VRF. You
can also use this attribute to return the suppressed
routes corresponding to a specific VRF to an active state.
peer-group-
name Enter the peer group name to reset the BGP sessions within
that peer group.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Added support for VRF.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
406
Border Gateway Protocol