Dell Networking S4810, Reference Manual

Page: 432 / 1761

Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information When you create a peer group, it is disabled (Shut mode).
Related
Commands
neighbor peer-group (assigning peers) — assigns routers to a peer group.
neighbor remote-as — assigns a indirectly connected AS to a neighbor or peer
group.
neighbor shutdown — disables a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message,
but responds to one.
S4810
Syntax
neighbor peer-group-name peer-group passive [limit sessions ]
To delete a passive peer-group, use the
no neighbor peer-group-name
peer-group passive
command.
Parameters
peer-group-
name Enter a text string up to 16 characters long as the name of
the peer group.
limit (Optional) Enter the keyword
limit
to constrain the
numbers of sessions for this peer-group. The range is from 2
to 256. The default is
256 .
Defaults Not configured.
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced the
limit
keyword on the S4810.
432
Border Gateway Protocol