Dell Networking S4810, Reference Manual

Page: 832 / 1761

management crypto-policy
Apply the crypto policy to management traffic.
S4810
Syntax
management crypto-policy name
To remove the management traffic crypto policy, use the
no management
crypto-policy name
command.
Parameters
name Enter the name for the crypto policy..
Defaults none
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
match
Apply an match filter to the crypto policy.
S4810
Syntax
match seq-num tcp [source ip address | ipv6 address { mask }
{ source-port number }] [ destination ip address | ipv6 address
{ mask } { destination-port number }]
To remove the match filter for the crypto map, use the
no match seq-num tcp
[ source ip address | ipv6 address { mask } { source-port number }]
[ destination ip address | ipv6 address { mask } { destination-port
number }]
command.
Parameters
seq-num Enter the match command sequence number.
source ip-
address | ipv6
address
Enter the keyword
source
then the IPv4 or IPv6 address for
the source.
mask Enter the mask prefix length in /nn format.
832
Internet Protocol Security (IPSec)