Dell Networking S4810 Reference Manual Download

Page: 381 / 1761

Version 9.0.2.0

Introduced on the S6000.

Version
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.0

Introduced on the Z9000.

Version 8.3.8.0

Introduced on the S4810.

Related
Commands

neighbor add-path

— specifies that this neighbor/peer group can send/receive

multiple path advertisements.

bgp always-compare-med

Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different

external ASs.

S4810

Syntax

bgp always-compare-med

To disable comparison of MED, enter

no bgp always-compare-med

Defaults

Disabled (that is, the software only compares MEDs from neighbors within the
same AS).

Command
Modes

ROUTER BGP

Command
History

This guide is platform-specific. For command information about other platforms,
refer to the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.2.1.0

Introduced command.

Version 7.7.1.0

Introduced on the C-Series.

Usage
Information

Any update without a MED attribute is the least preferred route.

If you enable this command, use the

clear ip bgp *

command to recompute

the best path.

Border Gateway Protocol

381

Summary of Contents for Networking S4810


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Networking S4810

Reviews:

Related manuals for Networking S4810

Brands by name

Popular brands

Dell Networking S4810, Reference Manual

Search results

Summary of Contents for Networking S4810

Reviews:

Related manuals for Networking S4810

Brands by name

Popular brands