Dell Networking S4810, Reference Manual

Page: 964 / 1761

Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Usage
Information
To prevent the link state database from receiving incorrect routing information
from unauthorized routers, use the
area-password
command on routers within
an area.
The configured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related
Commands
• domain-password — allows you to set the authentication password for a
routing domain.
• isis password — allows you to configure an authentication password for an
interface.
clear config
Clear IS-IS configurations that display under the router isis heading of the
show running-config
command output.
S4810
Syntax
clear config
Command
Modes ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Usage
Information
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will
be erased.
964
Intermediate System to Intermediate System (IS-IS)