Dell Networking S4810, Reference Manual

Page: 1349 / 1761

Parameters
interface-name Enter one of the following keywords:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.18.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Related
Commands
show qos statistics — displays the QoS statistics.
description
Add a description to the selected policy map or QoS policy.
S4810
Syntax
description { description }
To remove the description, use the
no description { description }
command.
Parameters
description Enter a description to identify the policies (80 characters
maximum).
Defaults none
Quality of Service (QoS)
1349