manualshive.com logo in svg

Dell Networking S4810, Reference Manual

Share
Download
Dell Networking S4810 Reference Manual Download Page 1557

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

E-Series legacy 
command

Example

Dell#show snmp user

  User name: v1v2creadu

  Engine ID: 0000178B02000001E80214A8

  storage-type: nonvolatile     active

  Authentication Protocol: None

  Privacy Protocol: None

Dell#

snmp ifmib ifalias long

Display the entire description string through the Interface MIB, which would be truncated otherwise to 63 

characters.

S4810 

Syntax

snmp ifmib ifalias long

Defaults

Interface description truncated beyond 63 characters.

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

unknown

Introduced on the E-Series.

Example

Dell#config!------command run on host connected to switch: 

--------------!

Simple Network Management Protocol (SNMP) and Syslog

1557

Summary of Contents for Networking S4810


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands