Dell Networking S4810, Reference Manual

Page: 1451 / 1761

Usage
Information
In the example above, accounting is used to track all usage of EXEC
command and commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1 for
example, use the
aaa accounting command 1
command.
Example
Dell(conf)# aaa accounting exec default start-stop
Dell(conf)# aaa accounting command 15 default start-stop tacacs
+
Dell(config)#
Related
Commands
enable password — changes the password for the
enable
command.
login authentication — enables AAA login authentication on the terminal lines.
password — creates a password.
tacacs-server host — specifies a server host.
aaa accounting suppress
Prevent the generation of accounting records of users with the user name value of NULL.
S4810
Syntax
aaa accounting suppress null-username
To permit accounting records to users with user name value of NULL, use the
no
aaa accounting suppress null-username
command.
Defaults Accounting records are recorded for all users.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4280T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
Security
1451