Dell Networking S4810, Reference Manual

Page: 656 / 1761

-c encryption
cipher Enter the following encryption cipher to use. (For v2 clients
only.) Without the FIPS mode enabled:
•
3des-cbc
: Force ssh to use 3des-cbc encryption cipher.
With the FIPS mode enabled:
•
aes128–cbc
: Force ssh to use the aes128–cbc
encryption cipher.
•
aes256–cbc
: Force ssh to use the aes256–cbc
encryption cipher.
-l username (OPTIONAL) Enter the keyword
—l
then the user name used
in this SSH session. The default is the user name of the user
associated with the terminal.
-m HMAC
algorithm Enter one of the following HMAC algorithms to use. (For v2
clients only.):
Without the FIPS mode enabled:
•
hmac-sha1
: Force ssh to use the hmac-sha1 HMAC
algorithm.
•
hmac-shal-96
: Force ssh to use the hmac-sha1–96
HMAC algorithm.
•
hmac-md5
: Force ssh to use the hmac-md5 HMAC
algorithm.
•
hmac-md5–96
: Force ssh to use the hmac-md5–96
HMAC algorithm.
With the FIPS mode enabled:
•
hmac-sha1
: Force ssh to use the hmac-sha1 HMAC
algorithm.
•
hmac-sha1–96
: Force ssh to use the hmac-sha1–96
HMAC algorithm.
-p port-
number (OPTIONAL) Enter the keyword
—p
then the port number.
The range is 1 to 65536
The default is 22
-v {1|2} (OPTIONAL) Enter the keyword
—v
then the SSH version 1 or
2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not
display in the output.
Defaults As indicated above.
656
FIPS Cryptography