Dell Networking S4810, Reference Manual

Page: 125 / 1761

Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
Usage
Information Messages can contain an unlimited number of lines; however, each line is limited
to 255 characters. To move to the next line, use
<CR>
. To send the message use
CTR-Z
; to abort a message, use
CTR-C
.
service timestamps
To debug and log messages, add time stamps. This command adds either the uptime or the current time
and date.
S4810
Syntax
service timestamps [debug | log] [datetime [localtime] [msec]
[show-timezone] | uptime]
To disable timestamping, use the
no service timestamps [debug | log]
command.
Parameters
debug (OPTIONAL) Enter the keyword
debug
to add timestamps to
debug messages.
log (OPTIONAL) Enter the keyword
log
to add timestamps to
log messages with severity from 0 to 6.
datetime (OPTIONAL) Enter the keyword
datetime
to have the
current time and date added to the message.
localtime (OPTIONAL) Enter the keyword
localtime
to include the
localtime in the timestamp.
msec (OPTIONAL) Enter the keyword
msec
to include milliseconds
in the timestamp.
show-
timezone (OPTIONAL) Enter the keyword
show-timezone
to include
the time zone information in the timestamp.
uptime (OPTIONAL) Enter the keyword
uptime
to have the
timestamp based on time elapsed since system reboot.
Defaults Not configured.
Control and Monitoring
125