Dell Networking S4810, Reference Manual

Page: 245 / 1761

fragments Enter the keyword
fragments
to use ACLs to control packet
fragments.
Defaults Not configured
Command
Modes CONFIGURATION-EXTENDED-ACCESS-LIST
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Add the DSCP value for ACL matching.
Version 8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3)
ACLs.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option. Deprecated the keyword
established
.
Version 6.5.10 Expanded to include the optional QoS
order
priority for the
ACL entry.
Usage
Information
The
monitor
option is relevant in the context of flow-based monitoring only. For
more information, refer to Port Monitoring .
The
order
option is relevant in the context of the Policy QoS feature only. The
following applies:
• The
seq sequence-number
command is applicable only in an ACL group.
• The
order
option works across ACL groups that have been applied on an
interface via the QoS policy framework.
• The
order
option takes precedence over
seq sequence-number
.
• If
sequence-number
is not configured, the rules with the same order value are
ordered according to their configuration order.
• If
sequence-number
is configured, the sequence-number is used as a tie
breaker for rules with the same order.
Access Control Lists (ACL)
245