Dell Networking S4810, Reference Manual

Page: 393 / 1761

Related
Commands show ip bgp dampened-paths — views the BGP paths.
bgp default local-preference
Change the default local preference value for routes exchanged between internal BGP peers.
S4810 S6000
Syntax
bgp default local-preference value
To return to the default value, use the
no bgp default local-preference
command.
Parameters
value Enter a number to assign to routes as the degree of
preference for those routes. When routes are compared, the
higher the degree of preference or local preference value,
the more the route is preferred. The range is from 0 to
4294967295. The default is
100 .
Defaults 100
Command
Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
All routers apply the
bgp default local-preference
command setting within
the AS. To set the local preference for a specific route, use the
set local-
preference
command in ROUTE-MAP mode.
Related
Commands set local-preference — assigns a local preference value for a specific route.
Border Gateway Protocol
393