Dell Networking S4810, Reference Manual

Page: 639 / 1761

name Enter the name of the domain to be appended to the DNS
list corresponding to the VRF.
Defaults None
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0) Introduced on the S-Series and Z-Series.
Usage
Information Use this command to add domain names to the DNS lists corresponding to a
specific VRF. You can add up to a maximum of six domain names to the DNS list
corresponding to a VRF. This domain is used to complete the unqualified host
names.
Example
Dell(conf)#ip domain-list vrf jay dell.com
Dell(conf)#ip domain-list vrf jay force10.com
ip host
Configures a mapping between the host name server and the IP address for a specific VRF. This mapping
information is used by the name-to-IP address table to resolve host names.
S4810
Syntax
ip host [vrf vrf-name] name ip-address
To undo the host name server to IP address mapping for VRFs, use the
no ip
host [vrf vrf-name] name ip-address
command.
Parameters
vrf vrf-name (Optional) Enter the key word
vrf
and then the name of the
VRF to configure the name server to IP address mapping for
that VRF.
name Enter the name od the host to be associated with an IP
address.
ip-address Enter the IP address of the name server in dotted decimal
format.
Defaults None
Command
Modes CONFIGURATION
Dynamic Host Configuration Protocol (DHCP)
639