Dell Networking S4810, Reference Manual

Page: 46 / 1761

When another user enters CONFIGURATION mode, Dell Networking OS sends a message similar to the
following:
% Warning: User "admin" on line vty2 "172.16.1.210" is in configuration
In this case, the user is “admin” on vty2.
Obtaining Help
As soon as you are in a command mode there are several ways to access help.
To obtain a list
of keywords at
any command
mode:
Type a
?
at the prompt or after a keyword. There must always be a space before
the
?
.
To obtain a list
of keywords
with a brief
functional
description:
Type
help
at the prompt.
To obtain a list
of available
options:
Type a keyword and then type a space and a
?
.
To obtain a list
of partial
keywords using
a partial
keyword:
Type a partial keyword and then type a
?
.
Example
The following is an example of typing
ip ?
at the prompt:
Dell(conf)#ip ?
access-list Named access-list
as-path BGP autonomous system path filter
community-list Add a community list entry
domain-list Domain name to complete unqualified host
name
domain-lookup Enable IP Domain Name System hostname
translation
domain-name Define the default domain name
fib FIB configuration commands
ftp FTP configuration commands
host Add an entry to the ip hostname table
max-frag-count Max. fragmented packets allowed in IP re-
assembly
multicast-routing Enable IP multicast forwarding
name-server Specify address of name server to use
pim Protocol Independent Multicast
prefix-list Build a prefix list
radius Interface configuration for RADIUS
redirect-list Named redirect-list
route Establish static routes
scp SCP configuration commands
source-route Process packets with source routing header
options
ssh SSH configuration commands
46
CLI Basics