Dell Networking S4810, Reference Manual

Page: 657 / 1761

Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.1(0.0) Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Related
Commands
ip ssh server Configure an SSH server.
show ip ssh
client-pub-
keys Display the client-public keys.
Usage
Information
Dell Networking OS supports both inbound and outbound SSH sessions using IPv4
or IPv6 addressing. Inbound SSH supports accessing the system through the
management interface as well as through a physical Layer 3 interface.
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
Example
If FIPS mode is not enabled:
Dell#ssh 10.11.8.12 ?
-c Encryption cipher to use (for v2 client
-l User name option
-m HMAC algorithm to use (for v2 clients only)
-p SSH server port option (default 22)
-v SSH protocol version
<cr>
Dell#ssh 10.11.8.12 -c ?
3des-cbc Force ssh to use 3des-cbc encryption cipher
Dell #ssh 10.11.8.12 -m ?
hmac-sha1 Force ssh to use hmac-sha1 HMAC algorithm
hmac-sha1-96 Force ssh to use hmac-sha1-96 HMAC algorithm
hmac-md5 Force ssh to use hmac-md5 HMAC algorithm
hmac-md5-96 Force ssh to use hmac-md5-96 HMAC algorithm
With FIPS mode enabled:
Dell#ssh 10.11.8.12 ?
-c Encryption cipher to use (for v2 client
-l User name option
-m HMAC algorithm to use (for v2 clients only)
-p SSH server port option (default 22)
<cr>
Dell#ssh 10.11.8.12 -c ?
aes128-cbc Force ssh to use aes128-cbc encryption cipher
FIPS Cryptography
657