Dell Networking S4810, Reference Manual

Page: 1360 / 1761

qos-policy-input
Create a QoS input policy on the router.
S4810
Syntax
qos-policy-input qos-policy-name cpu-qos | layer2
To remove an existing input QoS policy from the router, use the
no qos-policy-
input qos-policy-name cpu-qos | layer2
command.
Parameters
qos-policy-
name Enter the name for the policy map in character format (32
characters maximum).
cpu-qos (OPTIONAL) Enter the keyword
cpu-qos
keyword to assign
this ACL to control plane traffic only.
layer2 (OPTIONAL) Enter the keyword
layer2
to specify a Layer 2
Class Map. The default is Layer 3 .
Defaults Layer 3
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
Use this command to specify the name of the input QoS policy. Once input policy
is specified, rate-police can be defined. This command enables the qos-policy-
input configuration mode— (conf-qos-policy-in).
When changing a Service-Queue configuration in a QoS policy map, all QoS rules
are deleted and re-added automatically to ensure that the order of the rules is
maintained. As a result, the Matched Packets value shown in the
show qos
statistics
command is reset.
Related
Commands rate police — incoming traffic policing function.
1360
Quality of Service (QoS)