Dell Networking S4810, Reference Manual

Page: 264 / 1761

Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Related
Commands ip prefix-list — configures a prefix list.
deny
To drop packets meeting the criteria specified, configure a filter.
S4810
Syntax
deny ip-prefix [ge min-prefix-length ] [le max-prefix-length ]
To delete a drop filter, use the
no deny ip-prefix
command.
Parameters
ip-prefix Specify an IP prefix in the network/length format. For
example, 35.0.0.0/ 8 means match the first 8 bits of address
35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword
ge
and then enter the
minimum prefix length, which is a number from zero (0) to
32.
le max-prefix-
length
(OPTIONAL) Enter the keyword
le
and then enter the
maximum prefix length, which is a number from zero (0) to
32.
Defaults Not configured.
Command
Modes PREFIX-LIST
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
264
Access Control Lists (ACL)